sane-hp5400(5) SANE Scanner Access Now Easy sane-hp5400(5)
sane-hp5400 - SANE backend for Hewlett-Packard 54XX scanners
The sane-hp5400 library implements a SANE (Scanner Access Now Easy)
backend that provides access to the following Hewlett-Packard USB
More details can be found on the hp5400 backend homepage
This is ALPHA software. Keep your hand at the scanner's plug and unplug
it, if the head bumps at the end of the scan area. See also the BUGS
If you own a scanner other than the ones listed above that works with
this backend, please let us know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from
/proc/bus/usb/devices, sane-find-scanner(1) or syslog) to us. Even if
the scanner's name is only slightly different from the models mentioned
above, please let us know.
The contents of the hp5400.conf file is a list of usb lines containing
vendor and product ids that correspond to USB scanners. The file can
also contain the names of device files that correspond to an HP 54XX
scanner. Empty lines and lines starting with a hash mark (#) are ig-
nored. The scanners are autodetected by usb vendor_id product_id
statements which are already included into hp5400.conf. "vendor_id"
and "product_id" are hexadecimal numbers that identify the scanner. If
autodetection does not work, add the device name of your scanner to the
configuration file, e.g. /dev/usb/scanner0.
The backend configuration file (see also description of
The static library implementing this backend.
The shared library implementing this backend (present on systems
that support dynamic loading).
This environment variable specifies the list of directories that
may contain the configuration file. On *NIX systems, the direc-
tories are separated by a colon (`:'), under OS/2, they are sep-
arated by a semi-colon (`;'). If this variable is not set, the
configuration file is searched in two default directories:
first, the current working directory (.) and then in /usr/lo-
cal/etc/sane.d. If the value of the environment variable ends
with the directory separator character, then the default direc-
tories are searched after the explicitly specified directories.
For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
sult in directories tmp/config, ., and /usr/local/etc/sane.d be-
ing searched (in this order).
If the library was compiled with debug support enabled, this en-
vironment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_HP5400=4
sane(7), sane-usb(5), sane-find-scanner(1),
Martijn van Oosterhout <firstname.lastname@example.org>, Thomas Soumarmon
<email@example.com>. Manpage by Henning Meier-Geinitz <hen-
Scanning is only tested with Linux/ix86/gcc. Be careful when testing on
other operating systems and especially on big-endian platforms. The
scanner may get wrong data.
13 Jul 2008 sane-hp5400(5)
Man(1) output converted with