Scanners not supported by SANE

Manufacturer and model

Artec 1236 USB

Bus type

USB

Vendor ID

0x05d8

Product ID

0x4001

Chipset

The main board loks like this:
+--------------------------------------------+
|.[....]......................+---------+....|
|.............................|....1....|....|
|..+-----+....................+---------+....|
|..|..2..|...................................|
|..+-----+...................................|
|............................................|
+---|......................+---------+.......|
USB.|......................|.........|.......|
+---|......................|....3....|.......|
|..........................|.........|.......|
|........+-----+...........|.........|.......|
|........|..4..|...........+---------+.......|
|........|.....|...........U10...............|
|........+-----+.............................|
|...........+--+................+--+.........|
|...........|.6|................|.8|.........|
|...........+--+................+--+.........|
|...................+------+.................|
|...................|...5..|.................|
|...................+------+.................|
|.....+--+...................................|
|.....|.7|......................+-+.........[|===
|.....+--+......................|9|.........[|===ribbon.to.scanhead
|713-3901-100...................+-+.........[|===
|VER.1.04.[...]..............................|
|022599.9921.................................|
+--------------------------------------------+

Chip#1: GLT710008-15J3
        9741    00655

Chip#2: A39665LB
             9910
        M9101314APA

Chip#3:           AT014
          620-0014-700
         9914WD010

Chip#4: POWERVISION
        PV108630-C2L
        9919-U2B0A
        TAIWAN

Chip#5: Winbond
        W6662CF
        283664002
        9060C

Chip#6: HT93LC46
        9851K0264-3

Chip#7:  AIC
        1563CN
       0364E13

Chip#8:    9915U
         ULN20003A

Chip#9:  
        TL    74HC14D
        HA    C3130ME
        HN    HRN9914E
         D

Comments

Same id as one of the Artec Ultima 2000 scanners

Output of /proc/bus/usb/devices or sane-find-scanner -v -v

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05d8 ProdID=4001 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=1ms

<device descriptor of 0x05d8/0x4001 at 002:004>
bLength               18
bDescriptorType       1
bcdUSB                1.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x05D8
idProduct             0x4001
bcdDevice             1.00
iManufacturer         0 ()
iProduct              0 ()
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         64 (Self-powered)
 MaxPower             500 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    0
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         1 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
    checking for GT-8911 ...
    this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
    checking for MA-1017 ...
    this is not a MA-1017 (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
    checking for GL841 ...
    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
    checking for ICM532B ...
    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
    checking for PV8630/LM9830 ...
<This USB chip looks like a PV8630/LM9830>

found USB scanner (vendor=0x05d8, product=0x4001, chip=PV8630/LM9830) at libusb:002:004

    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.


SANE homepage
Contact