Scanners not supported by SANE

Manufacturer and model

Microtek Scanmaker 5950

Bus type

USB

Vendor ID

0x05DA

Product ID

0x30D8

Chipset

Comments

With ADF

Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv

T:  Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=05da ProdID=30d8 Rev= 1.00
S:  Product=USB2.0 SCANNER
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=500us

<device descriptor of 0x05da/0x30d8 at 004:003 (USB2.0 SCANNER)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          255
bDeviceSubClass       255
bDeviceProtocol       255
bMaxPacketSize0       64
idVendor              0x05DA
idProduct             0x30D8
bcdDevice             1.00
iManufacturer         0 ()
iProduct              2 (USB2.0 SCANNER)
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         3 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bcdUSB = 0x200)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GT-8911 ...
    this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bcdUSB = 0x200)
    checking for MA-1509 ...
    this is not a MA-1509 (bcdUSB = 0x200)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bcdUSB = 0x200)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL841 ...
    this is not a GL841 (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x200, bInterval = 0x0)
    checking for ICM532B ...
    this is not a ICM532B (check 2, bcdUSB = 0x200)
    checking for PV8630/LM9830 ...
    this is not a PV8630/LM9830 (bDeviceClass = 255)
    checking for M011 ...
    this is not a M011 (bcdUSB = 0x200)
    checking for RTS8822L-01H ...
    this is not a RTS8822L-01H (bDeviceClass = 255)
    checking for rts8858c ...
    this is not a rts8858c (bDeviceClass = 255)
    checking for SQ113 ...
    this is not a SQ113 (bDeviceClass = 255)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18)>

found USB scanner (vendor=0x05da, product=0x30d8 [USB2.0 SCANNER]) at libusb:004:003
    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.


SANE homepage
Contact