Plustek OpticSlim 550
It is an A5 scanner.
<device descriptor of 0x07b3/0x0c33 at 001:012 (PLUSTEK INC USB2.0 SCANNER)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 bDeviceSubClass 255 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x07B3 idProduct 0x0C33 bcdDevice 5.00 iManufacturer 10 (PLUSTEK INC) iProduct 11 (USB2.0 SCANNER) iSerialNumber 12 (1) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 192 (Self-powered) MaxPower 10 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 bInterfaceSubClass 255 bInterfaceProtocol 255 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 8 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for LM983[1,2,3] ... this is not a LM983x (bcdUSB = 0x200) checking for GT-6801 ... this is not a GT-6801 (bcdUSB = 0x200) checking for GT-6816 ... this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255) checking for GLxxx ... this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255) <This USB chip looks like a GL843 (result from sane-backends 188.8.131.52-3b47)> found USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x0c33 [USB2.0 SCANNER], chip=GL843) at libusb:001:012
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.